Wired Ethernet Networking
7
Press the reset button on your cable or DSL modem, then restart the
computer.
Where to go from here
Using your wired Ethernet network
Now that your wired Ethernet network has been created and configured, you
are ready to use the network. Go to
Adding a wireless access point to your wired Ethernet network
If you are also setting up wireless Ethernet networking on your computer, or
adding a wireless access point to your wired Ethernet network, go to
Ethernet Networking" on page
Troubleshooting your wired Ethernet network
If you cannot get your wired Ethernet network to work, go to
Your Ethernet Network" on page
48
"Sharing Your Resources" on page
49.
145.
www.gateway.com
131.
"Wireless
"Troubleshooting