Display&Sound Setup - EDAN SE-1200 Series User Manual

SE-1200 Series Electrocardiograph User Manual
Item Description
Rhythm Lead1/2/3 Choose from: І, П, Ш, aVR, aVL, aVF, V1, V2, V3, V4, V5, or V6
In the auto mode:
When Record Style is set to 3×4+1R or 6×2+1R, the rhythm lead
selected in the Rhythm Lead1 list box will be printed in the ECG reports;
When Record Style is set to 3×4+3R, 3 rhythm leads selected
respectively in the Rhythm Lead1/2/3 list box will be printed in the ECG
reports.
In the rhythm mode:
When Rhythm Style is set to Single Lead, 60s wave of the rhythm lead
selected in the Rhythm Lead1 list box will be printed in the ECG reports;
When Rhythm Style is set to Three Leads, 20s waves of three rhythm
leads selected respectively in the Rhythm Lead1/2/3 list box will be
printed in the ECG reports.
In the R-R analysis mode:
The R-R analysis report of the rhythm lead selected in the Rhythm Lead1
list box will be printed.
Lead Sequence
Lead
Lead group 1
Sequence
Standard І, II, Ш
Cabrera aVL, І, -aVR
Nehb Choose from: On or Off.
Lead Sequence: I, II, III, ND, NA, NI
NOTE: If you set Nehb to On, the working mode is fixed to be
Lead Off Hint Choose from: On or Off.
When it is set to On and lead off waves are detected in the presampled
waves, a lead off hint message will be displayed.
10.8 Display&Sound Setup
Select Display&Sound on the System Setup screen, and then press Enter to open the
Display&Sound Setup window.
Choose from: Standard or Cabrera
Lead group 2
aVR, aVL, aVF V1, V2, V3
II, aVF, Ш
manual.
- 98 -
Lead group 3 Lead group 4
V4, V5, V6
V1, V2, V3 V4, V5, V6
System Setup