Loading/Replacing Recorder Paper - EDAN SE-1200 Series User Manual

SE-1200 Series Electrocardiograph User Manual
NOTE:
1. When turning off the device, follow the above sequence strictly, or else there may be
something wrong on the screen.
2. Do not hold down the
is shutting down... on the screen.

3.6 Loading/Replacing Recorder Paper

Two kinds of recorder paper can be used. One is the folded thermal paper, and the other is the
rolled thermal paper.
NOTE:
1. When the folded thermal paper is used, the paper roller is unnecessary and must be
taken out.
2. When using the paper of 216mm in width, the two movable parts should be removed.
3. The exit edge can help you tear the recorder paper.
Make sure that the recorder paper, is installed in the center of the recorder, and the paper
edge is parallel with the casing edge in the direction of advancing paper, in order to avoid
paper deviation or damage to the paper edge.
When the recorder paper runs out or is not loaded, the hint message No Paper will appear on the
screen. Then you should load or replace the recorder paper immediately.
Groove
Paper Tray
Casing Button
Paper Roller
key when the device displays the hint information System
CAUTION
Movable
Part 1
Exit Edge
(Edge for
tearing paper)
Exit
Casing
- 31 -
Operation Preparations
Movable
Part 2