Resetting Parameters - Viessmann Vitotronic 200 Installation And Service Instructions Manual

Service scans
Operating conditions
Display screen
Normal room temp.
Room temperature
Solar DHW temp.
Collector temp.
Burner
Burner stage 1
Burner stage 2
Burner cycles
Consumption
Solar energy
Time
Date
Burner st. 1 Off/On
Burner st. 2 Off/On
Output 20 OFF/ON
Output 29 OFF/ON
Output 52 OPEN/CLOSE
DHW pump Off/On
Recirc.pump Off/On
Solar pump Off/On
Solar circuit pump hours run
Various languages

Resetting parameters

After a service has been carried
out, the following parameters can be
reset to "0" with e:
Burner hours run
Burner starts
Consumption
54
(cont.)
Explanation
Set value
Actual value, if a remote control unit is
connected.
Actual value in conjunction with a solar
heating system.
Actual value in conjunction with a solar
heating system.
Hours run
Hours run
Hours run
Actual value
If "26" or "29" has been selected via
coding addresses.
Display in kWh, in conjunction with a
solar heating system.
Position detail in %
In conjunction with a solar heating sys-
tem.
In conjunction with a solar heating sys-
tem.
The respective languages can be se-
lected as permanent display language
with d.