Boiler Coding Card - Viessmann Vitotronic 200 Installation And Service Instructions Manual

Components
Remote control
(cont.)
Coding
D PCB DIP switches (back of the
casing top)
Specification
Power supply via KM BUS.
Power consump-
tion
0.5 W
Protection class III
Protection IP 30
Permiss. ambient
temperature

Boiler coding card

To match the control unit function to the boiler (see page 18).
Function extension 0 - 10 V, part no. 7174 718
To default an additional set boiler water temperature via a 0 - 10 V input in the
range 10 to 100 °C or 30 to 120 °C.
For signalling reduced mode.
118
Never adjust DIP switch S3.
during opera- 0 to + 40 °C
tion
during storage
and transport 20 to + 65 °C
Setting range for 10 to 30 ºC;
set standard room change via coding
temperature address "E1"
Setting range for
set reduced room
temperature 3 to 37 ºC