Table 27. SATA Signal Connections
Module Pin Name
SATA_TX+/–
SATA_RX+/–
SATA_DEV_SLP
Table 28. Recommended SATA observation (test) points for initial boards
Test Points Recommended
One for each of the SATA_TX_+/– output lines.
One for each of the SATA_RX_+/– input lines.
JETSON TX2/TX2i OEM PRODUCT | DESIGN GUIDE | 20180618
Type
Termination
DIFF OUT
Series 0.01uF Capacitor
DIFF IN
Series 0.01uF Capacitor
O
1.8V to 3.3V level shifter
NVIDIA Jetson TX2/TX2i OEM Product Design Guide
Description
Differential Transmit Data Pair: Connect to SATA+/– pins of SATA
device/connector through termination (capacitor)
Differential Receive Data Pair: Connect to SATA+/– pins of SATA
device/connector through termination (capacitor)
SATA Device Sleep: Connect through level shifter to matching pin
on device or connector (pin 10 of Connector show in example).
Location
Near SATA device. Connector pins may serve as test points if accessible.
Near the module connector.
35