Table of Contents
Advertisement
Intel® Server Board M50CYP2SB Family Technical Product Specification
6.
Server Board Connector / Header Pinout Definition
This chapter identifies the location and pinout for most connectors and headers on the server board.
Information for some connectors and headers is found elsewhere in the document where the feature is
described in more detail.
Pinout definition for the following server board connectors is only made available by obtaining the board
schematics directly from Intel (NDA required).
•
All riser slots
•
OCP* module mezzanine connector
•
M.2 SSD connectors
•
DIMM slots
•
Processor sockets
Note: See
Appendix F
list of manufacturers and part numbers.
6.1
Power Connectors
The server board includes several power connectors that are used to provide DC power to various devices.
6.1.1
Main Power Connectors
Main server board power is supplied from two slot connectors that allow support for one or two CRPS type
power supplies to dock directly to the server board. The connectors are labeled "MAIN PWR 1" and "MAIN
PWR 2" on the server board as shown in the following figure. The server board provides no option to support
power supplies with cable harnesses. In a redundant power supply configuration, a failed power supply
module is hot-swappable.
connectors. The connector manufacturer is Amphenol* ICC (FCI); manufacturer part number is 10035388-
102LF.
for a list of connectors / headers used on the server board. The appendix provides a
Table 14
provides the pinout for the "MAIN PWR 1" and "MAIN PWR 2"
Figure 32. "MAIN PWR 1" and "MAIN PWR 2" Connectors
59
Advertisement
Table of Contents
