Point Count Restrictions; Point Event Count Restrictions - Emerson PACSystems RX3i User Manual

User Manual
GFK-2949E
1.8.2

Point Count Restrictions

Table 1: Maximum Point Counts
ADSU
M_SP_NA_1
M_DP_NA_1
M_ST_NA_1
M_BO_NA_1
M_ME_NA_1
M_ME_NB_1
M_ME_NC_1
M_EP_TB_1
M_EP_TC_1
1.8.3

Point Event Count Restrictions

Table 2: Maximum Event Counts
ADSU
M_SP_NA_1
M_DP_NA_1
M_ST_NA_1
M_BO_NA_1
M_ME_NA_1
M_ME_NB_1
M_ME_NC_1
M_EP_TB_1
Introduction
Maximum Point Maximum Point
Count (in a Demo Count (when
Mode) licensed)
16 1024
8 512
8 512
8 512
8 512
8 512
8 512
16 1024
16 1024
When SOE for this Memory Restriction
ADSU is enabled
2000 (Default -1024) Digital Memory Only.
2000 (Default -1024) Digital Memory, where each 2 points takes a byte.
2000 (Default - 512) Analog Memory, 16-bit width per point.
2000 (Default -1024) Word Memory, 32-bit width per point.
2000 (Default - 512) Analog Memory, 16-bit width per point.
2000 (Default - 512) Analog Memory, 16-bit width per point.
2000 (Default - 512) Word Memory, 32-bit width per point, "REAL" type.
2000 (Default - 512) Digital Memory Only (Only accessible through Point Push).
Chapter 1
Dec 2020
Memory Restriction
Digital Memory Only.
Digital Memory, where each 2
points is a byte.
Analog Memory, 16-bit width per
point.
Word Memory, 32-bit width per
point.
Analog Memory, 16-bit width per
point.
Analog Memory, 16-bit width per
point.
Word Memory, 32-bit width per
point, "REAL" type.
Only accessible through Point Push.
Only accessible through Point Push.
10