Table of Contents
Advertisement
User manual
P/N 3-9008-553
RISK TO PERSONNEL AND EQUIPMENT
The operation of the Daniel product involves heavy equipment handling. Observe the
following guidelines to avoid potentially serious injury:
•
Be aware of your limitations and ask for assistance if needed.
•
Do not attempt to lift weight beyond your capacity.
•
Lift with your legs, not your back.
Note
Mechanical lifting tools may also be used in some locations to reduce risk.
NOTICE
Attending the training course for this product is not considered sufficient for operating the
tool on pressurized lines. Emerson requires a two-man crew with formal training.
Additionally, at least one of the operators must have a record of extensive field experience
and be certified for this work.
Emerson assumes no responsibility for incidents, or consequences of incidents, occurring
as a result of the use of this product by others than Emerson or its designated personnel,
and have no liability whatsoever for any such work.
Consult Emerson for more details on both training and certification.
1.4
Warranty restrictions
Visually inspect all components for shipping damage. If shipping damage is found, notify
the carrier at once. Shipping damage is not covered by the warranty. The carrier is
responsible for all repair and replacement costs resulting from shipment damage.
1.5
Assistance
The Emerson Global Service Center is organized through a network of service centers
worldwide, and supports all service requirements or technical queries. For the Product
Support Help Desk, go to:
service provider.
1.6
Description of the Model 700 Control Valves
1.6.1
General features of the control valve
The Daniel
biased (loaded) to the closed position.
The valve can be configured as a check valve to prevent reverse flow. It is possible, in some
applications, to reverse flow through the pilot control loop, but this can be eliminated by
installing a check valve in the X-port.
User manual
WARNING
http://www.emerson.com
™
Model 700 Control Valve operates on a balanced piston principle, spring
November 2020
or contact your nearest Emerson
Introduction
9
Advertisement
Table of Contents
