User Manual
GFK-2949E
4.1.5
Station Manager
The RS-232 port on the EIS001 module is set up to be used as a Station Manager. Typically,
this is used for trouble-shooting and administrative purposes.
In addition to standard Station Manager commands, the EIS001 module responds to specific
Stat and Tally Station Manager commands for IEC 104 information. The formats are:
•
stat a. Response displays various operating status. Note the response for technical
support.
•
tally a. Response displays various operating counters. Note the response for technical
support.
See Appendix B: for examples of these two commands.
For all other commands and responses, refer to PACSystems TCP/IP Ethernet
Communications Station Manager User Manual, GFK-2225.
Each EIS001 will log many conditions to its own Station Manager Log, as well as to RX3i
Controller table as part of Fault Group 0x16.
System Operation
Chapter 4
Dec 2020
25