Emerson PACSystems RX3i User Manual page 78

User Manual
GFK-2949E
Parameter in control direction
(station-specific parameter, mark each Type ID 'X' if it is only used in the standard direction,
'R' if only used in the reverse direction, and 'B' if used in both directions)
File Transfer
(station-specific parameter, mark each Type ID 'X' if it is only used in the standard direction,
'R' if only used in the reverse direction, and 'B' if used in both directions)
Type identifier and cause of transmission assignments
(station-specific parameters)
Shaded boxes are not required.
Black boxes are not permitted in this companion standard
Blank: functions or ASDU not used.
Mark Type Identification/Cause of transmission combinations:
'X' if only used in the standard direction
'R' if only used in the reverse direction
'B' if used in both directions
Control Functions
<110> : = Parameter of measured value, normalized value
<111> : = Parameter of measured value, scaled value
<112> : = Parameter of measured value, short floating
point value
<113> : = Parameter activation
<120> : = File ready
<121> : = Section ready
<122> : = Call directory, select file, call file, call section
<123> : = Last section, last segment
<124> : = Ack file, ack section
<125> : = Segment
<126 : = Directory {blank or X, only available in monitor
(standard) direction}
<127> : = Query Log – Request archive file
Appendix D
Dec 2020
P_ME_NA_1
P_ME_NB_1
P_ME_NC_1
P_AC_NA_1
F_FR_NA_1
F_SR_NA_1
F_SC_NA_1
F_LS_NA_1
F_AF_NA_1
F_SG_NA_1
F_DR_TA_1
F_SC_NB_1
73