Drive - Still EXV 10 Basic Original Instructions Manual

Use

Drive

– Turn the switch key to the
tion (gentle acceleration and deceleration)
or the position (strong acceleration
Hare
and deceleration) as required.
– Hold one of the tiller handles (1) on one
side.
– Lower the tiller.
NOTE
The truck is only in the drive position in the (B)
zone. In the lower (A) zone or the upper (C)
zone, the mechanical brake is applied and the
traction motor is switched off.
NOTE
For details on driving a truck equipped with
the "OptiSpeed" option, see [Querverweisfeh-
ler: Ziel mit ID='Fahren_Option' nicht gefun-
den!]
NOTE
One of the travel throttles (2) or (3) on the tiller
can be operated with the right or left hand. Al-
ways operate the travel throttle slowly, as the
truck responds instantly. Abrupt starting or
braking or reversing the direction of travel
should be avoided at all costs.
Forward travel
– Use your thumb to press on the bottom part
of the throttle.
– The speed increases with the movement of
the throttle. The speed is limited to 4 or
6 km/h depending on the position of the
key.

posi-
Tortoise

45728043478 EN - 11/2021 - 09
B
A
0252_003-029
4
Driving
C
5˚
73