Table of Contents
Advertisement
RL78/G22 Fast Prototyping Board
1.3.1
Installing the e
2
For details on the procedure for installation, watch the video on "e
Family - Installation".
https://www.renesas.com/software-tool/rl78-software-tool-course
1. Download the installer for the latest version of the e
https://www.renesas.com/software-tool/e-studio
2. Unzip the downloaded zip file and run the installer file.
3. Select "RL78" for [Device Families].
4. Confirm that the latest version of Renesas CCRL has been selected as the compiler.
5. Select the [I accept the terms of the Software Agreements] checkbox and then click on the [Install] button.
6. When the software produces an installer window in the middle of installation, proceed with installation
according to the instructions from the wizard.
7. After installation has finished, click on the [OK] button.
1.3.2
Installing the CS+ IDE
1. Download the installer for the latest version of CS+ for CC from the following Web page.
https://www.renesas.com/software-tool/cs
2. Unzip the downloaded zip file and run the installer file.
3. Click on [Begin CS+ Startup].
4. Confirm that [Tools for RL78 family] has been selected.
5. After installation has finished, click on the [OK] button.
R20UT5121EJ0100 Rev. 1.00
Nov.16.22
studio IDE
studio Quick Start Guide Video for RL78
2
studio from the following Web page.
2
1. Overview
Page 2 of 35
Advertisement
Table of Contents
