Rock Picker Storage; Transporting The Tractor And Implement - Schulte Titan 5000 II Series Operator's Manual

11. ROCK PICKER STORAGE

Properly preparing and storing the rock picker at the end of the season is critical to maintaining its appearance
and to help ensure years of dependable service. The following are suggested storage procedures:
• Throughly clean all dirt or debris off the
implement to prevent damage from rotting
grass and standing water.
• Lubricate all implements points as detailed in
the maintenance section.
• Tighten all bolts and pins to the recommended
torque.
• Check the implement for worn and damaged
parts. Perform
replacements immediately
implement will be ready for use at the start of
the next season.
• Store the implement in a clean, dry place with
implement frame resting securely on blocks or
at ground level.
• Keep the hydraulic lines from sitting in water,
dirt and other contaminants.
• Use spray touch-up enamel where necessary
to prevent rust and maintain the appearance of
the implement. OPS-RP-0006
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Inadvertent contact with controls can cause the
Implement to shift or fall crushing themselves or others.

12. TRANSPORTING THE TRACTOR AND IMPLEMENT

Inherent hazards of operating the tractor and implement and the possibility of accidents are not left behind
when you finish working in an area. Therefore, the operator must employ good judgement and safe operation
practices when transporting the tractor and implement between locations. By using good judgement and
following safe transport procedures, the possibility of accidents while moving between locations can be
substantially minimized. OPS-U- 0017
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
Titan 5000 Series II 01/22
© 2022 Alamo Group Inc.
OPERATION
repairs and make
so that the
Operation Section 4-27
(SG-25)
(SG-10)