ASSEMBLY
Hitch Pole
Install the hitch pole (item 1) to the bell (item 2)
attached to the main frame using the 2" Pivot Pin
(Item 3).
Secure the pivot pin to the bell using the ½" x 4" bolt
and locknut as shown. Route hoses under the hose
guide before tightening.
Swing Hitch Lock Pin
Swing the hitch into either Transport or Working
(Offset) Position, and drop the lock pin into the
collar. Install the quick pin to secure it. Use of lock
pin is required with or without hydraulic swing
option.
Titan 5000 Series II 01/22
Assembly Section 3-25
© 2022 Alamo Group Inc.