Schulte Titan 5000 II Series Operator's Manual page 76

• Ensure the rock picker is securely attached to
the tractor drawbar with a proper size pin and
lynch pin.
• Ensure that a properly rated safety tow chain is
equipped securing the rock picker to the
tractor.
• Ensure rock deflector and rock deflector kit are
in position and not damaged. Replace worn,
broken, and missing sections immediately.
• Inspect that all bolts and screws are in position
and properly torqued.
• Ensure hydraulic hose brackets are in place
and bolted on correctly.
• Ensure hydraulic hoses have enough slack
while being operated or in transport.
• Ensure hydraulic hose are connected correctly
in tractor hydraulic ports and implement
hydraulic ports.
• Perform scheduled lubrication as specified in
the maintenance section.
• Ensure drive coupler is properly aligned as per
the maintenance section of this manual.
• Ensure reel is retained correctly and flange is
greased according to the maintenance section
of this manual.
• Ensure Batt Teeth are in good condition and
that the Batts are retained correctly on the
Reel. Refer to the Maintenance Section of
your Operator's Manual.
• Ensure Batt Springs eye-bolts are adjusted
correctly according
section of this manual.
• Inspect all bolts and screws that they are in
position and are properly torqued.
Titan 5000 Series II 01/22
© 2022 Alamo Group Inc.
OPERATION
to the maintenance
Operation Section 4-14