Nuts And Bolts; Bolt Grades And Torque - Schulte Titan 5000 II Series Operator's Manual

MAINTENANCE

NUTS AND BOLTS

Check all nuts and bolts for tightness after the first 8 hours of operation then weekly. Check the condition of
cotter pins, roll pins and other fasteners weekly and replace if necessary.

Bolt Grades and Torque

When replacing damaged bolts use only plated Grade 5 bolts unless otherwise specified. Use only bolts of the
correct length [Refer to the "Parts Manual"]. Do not replace locknuts with nuts and lockwashers. Use only
original equipment locknuts.
Recommended Torques in foot pounds for SAE Grade 5 bolts, based on dry assembly:
Titan 5000 Series II 01/22 Maintenance Section 5-5
© 2022 Alamo Group Inc.