27. Install the Grate and Reel assembly using spacers as needed to center the assembly. Install pins through
the Grate Float Lugs placed in Step 25.
28. Install the Grate Float Hydraulics as shown on both sides. Ensure the greaseable pin is used to connect
the rod clevis to the Grate Float Lugs.
29. Connect the hydraulic hoses as shown in the hydraulic schematic. Shift bottom elbow back to ensure
access to grate hinge pin grease zerks.
Titan 5000 Series II 01/22
© 2022 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-14