Schulte Titan 5000 II Series Operator's Manual page 77

• Ensure hydraulic cylinders are installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and are
secured with pins.
• Ensure Bucket and Grate Cylinders are raising
and lowering correctly.
Check for hydraulic oil leaks on the cylinders, along the hydraulic lines, and at tractor
hydraulic ports. IMPORTANT: DO NOT use your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for hydraulic oil leaks. Do Not attempt to dump the
Rock Picker bucket unless the Rock Picker tongue is securely attached to the tractor
drawbar. The Rock Picker could tip over and will cause equipment damage and possible
injury.
• Inspect rock pickers tire condition, wheel
bearings, and lug nut torque.
• Ensure tire pressure
specifications. Refer to maintenance sections
of your operators manual. OPS-RP-0005
Titan 5000 Series II 01/22
© 2022 Alamo Group Inc.
OPERATION
is to suggested
Operation Section 4-15