Schulte Titan 5000 II Series Operator's Manual page 30

INTRODUCTION
The Titan 5000 Series II Rock Picker is a reel type rock picking implement designed
primarily for picking surface rock 2" [51mm] to 27" [686mm] in diameter. With proper
maintenance as described in this manual, your Rock Picker will provide you with years of
dependable service with a minimum of repairs.
It is recommended that all operators of this implement read this manual or be instructed of
its contents as to safety, proper operation, and maintenance before beginning operation.
When ordering replacement parts for this rock picker, be sure to specify the serial number.
The serial number is located on the side of the Main Frame tube next to the Swing Hitch
Cylinder.
To place warranty into effect, fill out the warranty validation form in full and return it within
thirty (30) days of the date of purchase.
For the purpose of this Schulte equipment, the following definitions apply.
Left-hand side: Side which is to the left when the operator is facing in the normal forward direction of the
tractor.
Right-hand side: Side which is to the right when the operator is facing in the normal forward direction of the
tractor.
Titan 5000 Series II 01/22 Introduction Section 2-2
© 2022 Alamo Group Inc.