3. Web Configuration
This chapter introduces you how to access IPDSLAM devices via WEB user interface.
1. Please upgrade new firmware at first.
2. Configure management IP address
3. Open browser to access IPDSLAM via Web pages as below:
* Browse master control => http://[IP address]
* Browse master dsl => http://[IP address]:8800
* Browse standalone Slave => http://[IP address]
The default value for user name is admin and the password is 1234. Next, click OK.
3.1 System Configuration
For the system setup, there are several items provided for you to configure ---- Status,
SNMP Config, IP Config, Default Route, Commit, Reboot, Firmware Upgrade Setup, and
Configuration Backup/Restore.
27
User's Guide