Draytek VigorAccess-A48M-2-SFP-A-1-AC User Manual page 4

Copyright Information
Copyright
Declarations
Trademarks
Safety Instructions and Approval
Safety
Instructions
Warranty
User's Guide
Copyright 2009 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders.
The following trademarks are used in this document:
Microsoft is a registered trademark of Microsoft Corp.
Windows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
Apple and Mac OS are registered trademarks of Apple Inc.
Other products may be trademarks or registered trademarks of their
respective manufacturers.
Make sure that the AC power source is in the range of AC 90-260V. The
VigorAccess should be used in a sheltered area, within a temperature range
from -10 to +65 °C and relative humidity in the range of 10% and 95%.
DC power source operating condition: -42 to –56VDC. Do not expose the
VigorAccess to direct sunlight or other heat sources. The housing and
electronic components may be damaged by direct sunlight or heat sources.
Read the manual before turning on the power switch of device.
Locate the emergency power-off switch near the device prior to power
connection.
Fixing the device on chassis to maintain air circulation and stable
condition is recommended.
Do not work alone if the operation environment is dangerous.
Check and avoid the potential hazard for moist environment, and
grounding issue for power cable.
Please turn off the power switch when replacing fuse, installing or
removing chassis.
Do not place the device in a damp or humid place, e.g. a bathroom- (such
as this environment).
Avoid operating cable connection during lightning period.
When you want to dispose of the VigorAccess, please follow local
regulations on conservation of the environment.
Users can replace fuses by removing the module and replace it when
necessary. Other components should be repaired by authorized and
qualified personnel. Do not try to open or repair the device by yourself.
The fuse for AC power inlet should be identical to the following standard:
250VAC, 2A
We warrant to the original end user (purchaser) that the router will be free from
any defects in workmanship or materials for a period of two (2) years from the
date of purchase from the dealer. Please keep your purchase receipt in a safe
place as it serves as proof of date of purchase. During the warranty period, and
upon proof of purchase, should the product have indications of failure due to
faulty workmanship and/or materials, we will, at our discretion, repair or replace
the defective products or components, without charge for either parts or labor, to
whatever extent we deem necessary tore-store the product to proper operating
condition. Any replacement will consist of a new or re-manufactured
functionally equivalent product of equal value, and will be offered solely at our
discretion. This warranty will not apply if the product is modified, misused,
tampered with, damaged by an act of God, or subjected to abnormal working
conditions. The warranty does not cover the bundled or licensed software of
other vendors. Defects which do not significantly affect the usability of the
product will not be covered by the warranty. We reserve the right to revise the
manual and online documentation and to make changes from time to time in the
contents hereof without obligation to notify any person of such revision or
iv