Accessing To Web User Interface - Draytek VigorAP 906 User Manual

I-4 Accessing to Web User Interface
All functions and settings of this access point must be configured via the web user interface. Please
start your web browser (e.g., Firefox).
1. Make sure your PC connects to the VigorAP 906 correctly.
2. Open a web browser on your PC and type
ask for a username and password. Please type "admin/admin" on Username/Password and
click OK.

Note:
You may either simply set up your computer to get IP dynamically from the router or set up the IP
address of the computer to be in the same subnet as the IP address of VigorAP 906.
If there is no DHCP server on the network, then VigorAP 906 will have an IP address of

192.168.1.2.
If there is DHCP available on the network, then VigorAP 906 will receive its IP address via the

DHCP server.
If you connect to VigorAP by wireless LAN, you could try to access the web user interface

through http://vigorap.com.
http://192.168.1.2.
12
A pop-up window will open to