Commit; Reboot; Firmware Upgrade - Draytek VigorAccess-A48M-2-SFP-A-1-AC User Manual

Adsl2/2+ ip dslam
Table of Contents

Advertisement

Gateway
Apply

3.1.5 Commit

This page allows you to save current configured settings. Simply click Commit. The
device will restart after storing the configuration.

3.1.6 Reboot

This page allows you to reboot the device under different condition.
Reboot
Reboot Default
Reboot Last
Reboot Clean

3.1.7 Firmware Upgrade

This page allows users to upgrade firmware through a Web interface. In the System
group, click the Firmware Upgrade option. You can see the following page then. Before
you execute the firmware upgrade, please download the newest firmware from Draytek's
website (www.draytek.com) or FTP site (ftp.draytek.com) on the computer first.
Firmware
Apply
Firmware Upgrade from a Console Port
Type the gateway for the IP address of the next hop of this
route.
Click Apply to save the settings.
Reboot the system with current configuration.
Reboot the system with default settings.
Reboot the system with the lasted configuration.
Reboot the system with factory default values except IP
and VLAN for management only.
Specify the location of the firmware file if you want to
upgrade the firmware locally.
After finished your selection, please click Apply to
execute the firmware upgrade.
31
User's Guide

Advertisement

Table of Contents
loading

Table of Contents