Table of Contents
Advertisement
6.2.2
Install the cabinet on the foundation
Preliminary requirements
Procedure
1. Carefully lower the cabinet on the
foundation with a hoisting equipment
or a forklift truck. Refer to section
5.6.1.
2. Make sure that the holes in the cabinet
(A) and the foundation (B) are aligned.
3. Install the fasteners (C) and the
washers.
4. Tighten the fasteners to the correct
torque. For the specification, refer to
section 12.14.
6.2.3
Open the cable inlets
Preliminary requirements
Procedure
1. Open the door. Refer to section 10.1.
2. Loosen the fasteners (A).
3. Move the sliding plates (B) to open the
cable inlets.
9AKK107992A3069-EN | 004
•
Hoisting equipment or
forklift truck
•
Torque wrench
Caution: Make sure that
there is no kink in the
cables.
•
Open spanner
Installation
•
Four fasteners M16 and
washers
C
A
B
B A
39
Advertisement
Table of Contents
