Access to parts
9
Access to parts
9.1
Remove the cabinet cover
1. Remove these parts:
•
•
9.2
Install the cabinet cover
Preliminary requirements
Procedure
1. Install these parts:
•
•
2. Seal the cabinet cover to the cabinet.
Use the anti-tamper label (C).
1
This step is only necessary for an MID cerified EVSE.
50
Screws (A)
Cabinet cover (B)
1.
The maintenance cover is
installed.
Cabinet cover (A)
Screws (B)
B
A
•
1
A
B
Anti-tamper label
C
BCM.V3Y01.0-EN | 002