Outputs; I-Out; Units - INTEGRA Metering CALEC ST III User Manual

Operation
Display
Ref
6.6.9

Outputs

This menu is only available if the output hardware module is installed in the device.
Display
Nr
Fct
SIG
IMP
SIG
GW1
GW2
HYS
CNT
ACT
STA
STA
6.6.10

I-Out

This menu is only available if the I-OUT analog hardware module is installed in the device.
Display
Nr
Fct
SIG
0/4
20
do
Err
STA
6.6.11

Units

Display
Eu
Ed
V
44 / 56
Meaning
Threshold for return temper-
ature in option TGR
Overstepping: register E2 Un-
dercutting: register E3
Meaning
Output number
Output function
Signal type of the output (A)
Pulse value for the function
of the output (A)
(B, C)
Limit value 1 (B, C)
Limit value 2 (C)
Hysteresis of the output (B,
C)
Pulse counter / seconds over-
stepped (A, B, C, D, E)
Effective direction of the out-
put (B, C, D, E, F)
Actual status (A, B, C, D, E)
Actual status (F)
Meaning
Output number (1...4)
Output function
Type of analogue output (A,
B)
Value at 0 mA or 4mA (A, B)
Value at 20 mA (A, B)
Simulation mA value (C)
Current output in case of er-
ror (A, B)
Current value (A, B)
Meaning
Energy unit
Number of decimal places for
energy unit
Unit and number of decimal
places for volumes unit
Visible
According to calculator function
Visible
Yes
Yes
Depends on the output function
Fct
Depends on output function Fct
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Visible
Yes
Yes
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Depends on output function
Visible
Yes
Yes
Yes
Editable
Programming mode
Editable
Yes
Service mode
Service mode
Service mode
Service mode
Service mode
Service mode
Service mode
Service mode
Service mode
Yes
Service mode
Editable
Yes for selection
Service mode
Service mode
Service mode
Service mode
Service mode
Service mode
Yes
Editable
Programming mode
Programming mode
Programming mode
3-140-UM-EN-02