Installation
Close the front cover
Fit and close the cover (1).
u
Tighten two screws (2).
u
Remove the safety caps (3) from the top of the
u
housing. Attach them to each screw with the
smooth side facing outwards.
5.2.2
Installation on a rail DIN EN 50222
Tools and installation material are not included in the delivery.
Flat screwdriver 3.5×0.6
l
Drill bit Ø6
l
Screws 2×Ø4
l
Dowels 2×Ø6
l
Washers 2×4.3×12
l
Using the drilling template [}p. 55], drill two
u
holes (1) Ø6 mm into the wall.
Mount dowels 2×Ø6.
u
Mount the rail (2) with the two screws (3) and
u
washers onto the wall.
3-140-UM-EN-02
1
3
2
3
2
2
3
1
21 / 56