Declaration Of Conformity; About The Instructions; Purpose Of This Instruction; Structure Of Overall Documentation - INTEGRA Metering CALEC ST III User Manual

Introduction
Standards
EN 61326-1
EN 62479
EN 300 220-2:V3.1.1
EN 300 330:V2.1.1
EN 300 328:V2.1.1
Specific
PTB K7.2, Ordonnance of FDJP 941.231 (CH), Welmec 7.2, OIML D11
1.1.5

Declaration of conformity

The declaration of conformity is available by scan-
ning the QR-Code.
1.2

About the instructions

1.2.1

Purpose of this instruction

This instruction is part of the product. Keep the instruction handy so that it is always accessible at all times.
This instruction is intended to ensure that the product is used safely and for the intended purpose. The op-
erator must ensure that the operating personnel have read and understood the instructions. The operator
must ensure that the operating instructions of the associated products are also read and understood.
1.2.2

Structure of overall documentation

The following documents complete the documentation of this product:
User manual (this document). Available for download on
l
Installation guide. Included in the product delivery.
l
Technical data sheet. Available for download on
l
1.2.3

Layout conventions

Symbols and text markups
This document contains various symbols and text markups.
Symbol
l
u
u
w
(1)
Legal notice
Tips are used to support the reader in handling the product.
12 / 56
Name
Enumeration
Action
Reaction
Item numbers
[}p. 2] Cross-reference
https://integra-metering.com/downloads
https://integra-metering.com/downloads
Function
The grey dot marks a non-numbered list.
The grey triangle marks actions that must be per-
formed in the corresponding order.
The white triangle marks the reaction to an action.
The numbers inside the brackets refer to the items
in an image.
Cross-references are used to refer to a chapter
within the document. They are linked and are acces-
sible from the PDF by a mouse click.
3-140-UM-EN-02