Display; Buttons - INTEGRA Metering CALEC ST III User Manual

Operation
6.1.1

Display

Heating circuit
Cooling circuit
External power supply OK
Low battery
Edit – esc.
Edit – OK
Edit – mode
Memory value
Wireless connected
Wired connected
Closed: User mode
Open: Service mode
Programming mode
Error / alarm present
6.1.2

Buttons

1 UP
To scroll up or left in the operation matrix.
To increment a number which is in edit mode.
2 DOWN
To scroll down or right in the operation matrix.
To decrement a number which is in edit mode.
3 ESC
To exit an edited value or selection without
changes.
Long-press: To jump to the home position of
the operation matrix.
Press "Esc" of a counter value: Change to
"High-Resolution" or back.
4 ENTER
To accept a value or selection which is in edit
mode.
To select a menu in the operation matrix.
3-140-UM-EN-02
Flow display channel #1
Flow display channel #2
Limit value
Memory no. / channel no.
Tariff
1
2
3
4
37 / 56