INTEGRA Metering CALEC ST III User Manual page 35

Installation
Module #1: A11/B11 (Channel #1)
Module #1: A12/B12 (Channel #2)
Disconnect the CALEC® ST III from the power
u
supply.
Take off the front cover [}p. 20].
u
If module #1 / channel 1 is used:
u
Connect the passive analog signals to terminal
A11 (+) and B11 (-).
If module #1 / channel 2 is used:
u
Connect the passive analog signals to terminal
A12 (+) and B12 (-).
If module #2 / channel 1 is used:
u
Connect the passive analog signals to terminal
A21 (+) and B21 (-).
If module #2 / channel 2 is used:
u
Connect passive analog signals to terminal A22
(+) and B22 (-).
Close the front cover [}p. 20].
u
Apply voltage.
u
For the programming options to this module see I-
Out [}p. 44].
3-140-UM-EN-02
Module specifications:
Current range: 4...20 mA / 0...20 mA
Supply voltage: 6...24 VDC
Electronical isolation max.: 48 VDC
Resistance ≤ 837 Ω / 24 VDC
Module #2: A21/B21 (Channel #1)
Module #2: A22/B22 (Channel #2)
35 / 56