Table of Contents
Advertisement
5.
Understanding the interface RUBIN® SONIC Smart
5. 1. Understand the face plate
5. 2. Screen display information
5. 2. 1. Display sequence
To show the data read by the meter in the display, various windows have been created as functions that can display the assigned
system information.
The LCD screen changes automatically to display the following information: net or forward volume, reverse volume, flow rate,
events, firmware version, flow direction, meter state.
The basic display sequence is defined in two cycles, one main cycle and a secondary which launches after 120 seconds.
The basic display sequence:
LCD screen
Events (if event are set)
5. 2. 2. Display characteristics
Display indication
Units
Displayed values
Evenrs and alarms
8/13
Description
Display time
Net volume
Flow rate
Service (if service error
are set)
LCD 10 digits
3
m
, L, Hour
Volume, flow, reverse flow, display test, events and alarms statuts, F/W version
Reverse flow, low battery, leakage, air bubbles, burst, frost, heat, dry, over, temperature, no con-
sumption
The second sequence of the display every 120s:
LCD screen
10s
2s
2s
2s
Description
Display time
Display all segment ON
Display all segment OFF
Display metrology FW
version and CRC
1-320-UM-EN-03
2s
2s
2s
Advertisement
Table of Contents
