Safety Information - Quectel FG50V Hardware Design

1.1. Safety Information

The following safety precautions must be observed during all phases of operation, such as usage, service or repair
of any cellular terminal or mobile incorporating FG50V module. Manufacturers of the cellular terminal should notify
users and operating personnel of the following safety information by incorporating these guidelines into all manuals
of the product. Otherwise, Quectel assumes no liability for customers' failure to comply with these precautions.
FG50V_Hardware_Design
Full attention must be given to driving at all times in order to reduce the risk of an
accident. Using a mobile while driving (even with a handsfree kit) causes distraction and
can lead to an accident. Please comply with laws and regulations restricting the use of
wireless devices while driving.
Switch off the cellular terminal or mobile before boarding an aircraft. The operation of
wireless appliances in an aircraft is forbidden to prevent interference with
communication systems. If there is an Airplane Mode, it should be enabled prior to
boarding an aircraft. Please consult the airline staff for more restrictions on the use of
wireless devices on an aircraft.
Wireless devices may cause interference on sensitive medical equipment, so please be
aware of the restrictions on the use of wireless devices when in hospitals, clinics or other
healthcare facilities.
Cellular terminals or mobiles operating over radio signal and cellular network cannot be
guaranteed to connect in certain conditions, such as when the mobile bill is unpaid or the
(U)SIM card is invalid. When emergency help is needed in such conditions, use
emergency call if the device supports it. In order to make or receive a call, the cellular
terminal or mobile must be switched on in a service area with adequate cellular signal
strength. In an emergency, the device with emergency call function cannot be used as
the only contact method considering network connection cannot be guaranteed under all
circumstances.
The cellular terminal or mobile contains a transceiver. When it is ON, it receives and
transmits radio frequency signals. RF interference can occur if it is used close to TV sets,
radios, computers or other electric equipment.
Wi-Fi&BT Module Series
FG50V Hardware Design
10 / 54