Starting Up At A Glance - Atmos i View COLPO Operating Instructions Manual

Table of Contents

Advertisement

3.0 Setting up and starting up

3.6 Starting up at a glance

Adjust colposcope to initial position on the colposcope suspension by use of the fixing wheel.
Adjust all the clamps on the carrier and float arm to secure the movability of the arm in compliance with the require-
Adjust the interocular distance by pressing or pulling the lens tubes together or apart. The interocular distance is
Persons without glasses
Eyepieces remain in initial posi-
tion (eyepieces are pulled out).
Diopter scale adjusted to zero
Set the 5-fold magnification changer unit to maximum zoom (2.0). Approach the object with the colposcope (ac-
cording to the chosen focal distance) until the image is sharp. If the zoom level is changed, the grade of sharpness
Brightness can be adjusted by the rotating knob on the bottom of the device if necessary.
14
Adjust colposcope horizontally and vertically.
Swing in colposcope into the working space.
perfectly adjusted when you look through and a circular picture is visible!
Adjusting the eyepieces
People with defective vision
and glasses
Keep glasses on, push
eyepieces in direction of the
lens tube until they engage
audibly. Adjust diopter scale
to zero.
ments.
Persons with glasses
People with defective
vision without glasses
(refraction values known)
Remove glasses and adjust
diopter scale to matching
number (eyepieces are
pulled out).
is retained.
People with defective
vision without glasses
(refraction values un-
known)
Remove glasses and adjust
both eyepieces to +5 dpt.
Remove the lens tube from
the colposcope head and
focus on an object* in the
distance. The object still
looks blurred. Turn the diop-
ter ring of the first eyepiece
slowly in clockwise direction
until the object is sharp.
Keep your other eye closed
while adjusting the eyepiece.
Repeat this procedure a
couple of times to determine
an average value. Adjust
the second eyepiece by
the same procedure and
reattach the lens tube to the
colposcope head with the
connective screw (eyepieces
are pulled out).
* Never use the sun as an
object!

Advertisement

Table of Contents
loading

This manual is also suitable for:

I view 21 colpoI view 31 colpo

Table of Contents