Table of Contents
Advertisement
4.0 Operation
Setting dial
Lens
Grub screw
4.6 Exchanging the lenses
The designated thread on the colposcope head allows
for easy exchange and fixation of the different lenses.
Via the integrated screw mount, lenses can be loosened
by turning them to the left and fixated by turning them to
the right.
4.7 Exchanging the lenses with
manual fine focusing
Mount lens as described above and secure it with the
intermediate screwed ring.
4.8 Exchanging the VarioFocus lens
To loosen the VarioFocus lens from the colposcope
head, turn it to the left. To tighten the VarioFocus lens on
the colposcope head, turn it to the right onto the thread.
Position the setting dial.
The setting dial can be positioned on either side of the
VarioFocus lens.
Attention! During the process, firmly hold the Vario-
Focus lens just in case it may loosen itself from the
colposcope head and fall off.
Loosen the three grub screws on the lens. Continue
to hold the lens and turn the setting dial in the desired
position. Tighten the three grub screws.
4.9 Adjusting the 5-fold magnification
changer
The 5-fold magnification changer from ATMOS enables
free range zoom between 0.5x up to 2.0x.
• Select the desired zoom factor by selecting one of the
lateral rotary knobs.
• Pay attention that the chosen zoom factor engages
audibly with the groove.
• Freely adjustable zoom factors: 2.0 - 1.4 - 1.0 - 0.7 -
0.5.
• The magnification which points in the direction of the
eyepieces is the current magnification.
17
Advertisement
Table of Contents
