Table of Contents
Advertisement
4.0 Operation
Alle Maße in mm
all dimensions in mm
Allgemeintoleranzen /
General tolerances
DIN ISO 2768 - mK
über 30 mm ±0,3
Datum
Erstellt
27.03.3013 C.Reinhardt
Bearb.
Gepr.
ATMOS Medizin T echnik GmbH & Co. KG
Ludwig - Kegel - Str. 12, 14-16, 18
79853 Lenzkirch / Germany
Tel: +49 7653 689 -0
Fax: +49 7653 689 -190
Datum
Name
atmos@atmosmed.de
(date)
(name)
MedizinTechnik
www.atmosmed.de
20
AFD
LED
STROBO
M M O O D D E E
Maßstab (scale)
Werkstoff (material)
-
Name
Benennung (designation)
Tasterfolie
Zeichnungs /
060.0621.0
Artikel-Nr.
(part no.)
Ers.f.:
4.16 Image and video recording
Integrated camera: If desired, an HD camera can be inte-
grated in the ATMOS i View 31 COLPO.
External video recorder: External video recorders can be
controlled via the panel buttons if they are connected to the
jack plugs "Freeze" and "Record".
Control panel buttons:
Save image.
Start/stop the recording of a video frequency.
Adjust the light mode of the integrated HD camera.
The data are transmitted to a connected PC (USB interface).
Only with an integrated HD camera
You can change between the integrated HD camera and
external video sources by switching the LED light on or off.
As soon as the LED light goes off, the integrated camera is
switched off and the data from the external video source is
displayed (Video Out 1 - 3).
Also observe this within the automatic light switching.
4.16.1 Adjusting the light mode of the integrated
By pressing the MODE button once, the current light mode
of the integrated HD camera is displayed on the monitor.
By pressing the MODE button again, the light mode can be
changed.
Light mode
Standard
Center
Warm
1:1
Konstr. - Nr:Mikolp-200-001.
Ers.d. :
HD camera
Display on the monitor
LED light remains unchanged.
When the power is switched on, the default
setting is automatically selected.
LED light will be displayed with fewer reflec-
tions.
Suitable for recordings through a speculum.
LED light appears warmer.
-
Blatt
(sheet)
1
Advertisement
Table of Contents
