Table of Contents
Advertisement
3.0 Setting up and starting up
3.2.6
Rear view of the control device of the ATMOS i View 31 COLPO with an integrated HD camera
HD video input. Can
only be used for the HD
camera module.
Video In
Intern 1
Microscope
Connection for the
Not in use
supply to the colpo-
scope electronics
and control line
3.3 Integration options
Please note the assembly instructions for the integration options.
Examination chair
Your ATMOS Sales and Service partner will be happy to inform you about options for
adapting the colposcope to examination chairs.
Mobile stand
When moving the roller stand, please make sure that the colposcope arm is in a retracted position and the screws are tightened.
Risk of injury! Take care not to roll the mobile stand over your feet when moving the stand.
!
When the device is placed in working position, the brakes must be locked.
12
HD video input from
HD video outlet from the vid-
an external HD
eo source Intern 1 or Extern 2
video source
Video In
Extern 2
Strobo
Sensor
Record Freeze
Output signals of
Output signal
the tilt sensor in the
of the "Video
carrier arm system
record function"
Video Out
Out 1
Out 2
Out 3
PC/USB
Output signal of
the "Freeze frame
function"
Connection to the foot
switch for switching be-
tween the light channels
Foot Switch
100 - 240V~
2 x T 3,15A
PC connection
Connection for potential
(optional)
equalization line acc. to
IEC 60417-5021
IEC power plug with fuse
inlay for the connection
to the power supply
Advertisement
Table of Contents
