Dismounting - Toshiba V Series User Manual

2.1.2

Dismounting

Dismount the base unit/fan unit in the following procedure.
(1) Loosen each of the four screws that fix the base unit/fan unit, by rotating it a few
turns counterclockwise using a Phillips screwdriver.
(2) Lift the base unit/fan unit so that the head of each fixing screw enters the larger
section of each mounting hole, then remove the unit by pulling it to the operator side.
(3) Remove the four fixing screws from the mounting bar of the console.
6F8C0882
2.1 Mounting/Dismounting of Base Unit and Fan Unit
2. Lift the unit upward so that the screw
head enters the larger section of the
mounting hole.
1. Loosen the screw (4 positions)
by rotating it a few turns.
3. Pull the unit to the operator
Figure 2-2 Base Unit Dismounting Procedure
side, for removal.
2
31