Names And Functions Of Modules - Toshiba V Series User Manual

Integrated controller
Hide thumbs Also See for V Series:
Table of Contents

Advertisement

1.6 Names and Functions of Modules

The L3 controller is composed of a CPU module (S/L/C), an Ethernet EN7 module,
expansion interface modules, and a power supply module which supplies power to these
modules. This section describes the name and function of each module.
Table 1-5 and table 1-6 list modules and basic base units, respectively, to be used for the
L3 controller.
CPU
module
Power supply module
Expansion
interface
module
Ethernet EN7 module
TC-net 10 module
NOTE
• The S3 CPU module or C3 CPU module does not support duplex configuration. Refer to the
"model 3000 Sequence Controller S3 User's Manual - Basic Hardware" (6F8C0866) for the
S3 CPU module, the "model 3000 Computer Module C3 User's Manual" (6F8C0892) for the
C3 CPU module, and the "model 3000 Ethernet module User's Manual" (6F8C0878) for the
EN7 module.
6F8C0882
Table 1-5 Modules
Name
Type
L3 CPU module
L3PU11 Loop control module: Connectable with the OIS1200
L3PU21 Loop control module: Connectable with the OIS-DS
S3 CPU module
S3PU21 Sequence control module: 64KS/48KW
S3PU45 Sequence control module: 112KS/64KW
S3PU55 Sequence control module: 112KS/128KW
S3PU65 Sequence control module (Duplex): 112KS/128KW
C3PU11 Computer control module: µITRON-based OS
C3 CPU module
C3PU21 Computer control module: Windows NT
PS791
PS791S Ditto (Equipped with shutdown sequence switch)
PS735
Serial
IF735
Direct
IF721
IF741
For duplex
IF719
configuration
IF728
IF748
EN711
EN721
EN731
EN741
CN711
CN712
1.6 Names and Functions of Modules
Specification
(With no station bus)
Input: 100/200 Vac
Output: 3.3 Vdc - 1.5 A, 5 Vdc - 20 A
Input: 24 Vdc
Output: 5 Vdc - 15 A, 3.3 Vdc - 1.5 A
Serial I/O expansion module: Expansion for three SIF
channels
Direct I/O expansion module: Expansion for two PIF
channels
Direct I/O expansion module: Expansion for four PIF
channels
Duplexing interface module (With no PIF)
Duplexing interface module (With two PIF channels)
Duplexing interface module (With four PIF channels)
For 10BASE5 single bus
For 10BASE5 duplex bus
For 10BASE2 single bus
For 10BASE2 duplex bus
TC-net 10: Single-line type
TC-net 10: Dual-line type
1
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

3000

Table of Contents