Table of Contents
Advertisement
http://getMANUAL.com
2-7. Removing/Installing the Cabinet and FTP Panel
Removing/Installing the FTP Panel E
Removal
1. Lower the movable panel.
2. Disconnect the two harnesses connected to the board of the movable panel.
3. Disconnect the two harnesses above fixed to the frame and FTP panel E from the clamper.
4. Remove the two screws, and remove the FTP panel E.
At this time, pass the harnesses through the hole in the FTP panel E and remove it.
Hole
B4 x 8
Harness
B4 x 8
Move panel
FTP panel E
Installation
5. Perform the reverse of steps 1 to 4 of the removal procedure.
2-31
FVS-1000 MMP1
Advertisement
Table of Contents
