Sony FVS-1000 Maintenance Manual page 32

1-10. Installation Procedure
5. Release the lock, then pull out the camera shifter.
6. Turn the lens mount lever in the direction of arrow, then remove the protection cap from the CCD unit.
Lens mount lever
Lock
Camera shifter
Protection cap
Lock
CCD unit
7. Install the lens of which the protection cap is removed to the CCD unit, then turn the mount lever in
the direction of arrow as shown in the following figure to fix.
8. Connect the lens control cable with the connector of the camera shifter.
Lens mount lever
Camera shifter
Lens
Reference pin
Connector
Lens control cable
Lens control cable
1-22
FVS-1000 MMP1