Table of Contents
Advertisement
Number
Sensor
1
Front internal lock SW
2
S side tension regulator potential meter
3
S tension regulator position sensor
4
S side reel A/B winding SW
5
Lens emergency
(Photo-diode)
6
Gate (retainer) discrimination SW
7
S side PAD roller position sensor
8
S side PT roller position sensor
9
A side PAD TYPE SW
!/
Electrostatic sensor
!-
Gate TYPE SW
!=
Slide adaptor detection SW
![
Mirror
!]
Gate position sensor
!\
T side tension regulator potential meter
!;
T side tension regulator position sensor
!'
T side reel A/B winding SW
!,
Lens emergency (LED)
FVS-1000 MMP1
http://getMANUAL.com
@.
#-
#/
Rear side
Function
The power is turned on by closing the front door.
This meter detects the rotation angle of the S side tension
regulator arm.
This sensor detects load and unload position of S tension
regulator.
This switches A/B winding at the S side reel.
This detects the lens position.
This switch discriminates between 16 mm and 35 mm of
the gate.
This sensor detects load and unload position of the S side
PAD roller.
This sensor detects load and unload position of the S side
PT roller.
This switch discriminates between 16 mm and 35 mm of
the S side PAD roller and detects whether the S side PAD
roller is installed or not.
This sensor detects the film (perforations) position.
This switch discriminates between 16 mm and 35 mm of
the gate and detects whether the gate is installed or not.
This switch detects the slide adaptor.
This sensor detects the load and unload position of the
gate (retainer).
This meter detects the rotation angle of the T side tension
regulator arm.
This sensor detects the load and unload position of the T
side tension regulator.
This switches A/B winding at the T side reel.
This detects the lens position.
2-3. Location of Main Parts
2-11
Advertisement
Table of Contents
