Table of Contents
Advertisement
T side:
. CN6/SE-446 board
. CN1 to CN6/CN-1748 board
. CN1/CN-1749 board
. CN8/CN-1623 board
6. Removing the tension regulator
assembly
Remove the four screws, and remove the tension
regulator assembly.
Installation
7. Installing the tension regulator
assembly
Install the tension regulator assembly using the
four screws.
8. Connecting connectors
Connect the connectors removed in step 5.
9. Installing the FTP panel
Install the FTP panel removed in step 4.
(Refer to section 2-7-4.)
10. Installing the door
Install the door removed in step 3.
(Refer to section 2-7-3.)
11. Installing the rear panel (top)
Install the rear panel (top) removed in step 2.
(Refer to section 2-7-2.)
12. Installing the side and top panels
Install the side and top panels removed in step 1.
(Refer to section 2-7-1.)
FVS-1000 MMP1
Front of PT assenbly
SE-446 board
CN6
Tension regulator (S) assembly
Screws
5 x 12
W5
W5
Screws
5 x 12
4-5. Replacing the Tension Regulator Assembly
Rear of S base plate
CN-1623 board
CN8
Rear of T tension regulator
assenbly
CN-1749 board
CN1
Rear of T tension regulator
CN-1748 board
assenbly
CN4
CN5
CN7
CN8
CN6
CN1
CN2
CN3
4-9
Advertisement
Table of Contents
