Table of Contents
Advertisement
2-7. Removing/Installing the Cabinet and FTP Panel
Removing/Installing the FTP Panel B
Removal
1. Rotate the knob assembly in the counterclockwise direction and remove it. (S side only) (Refer to
''Removing/Installing the FTP Panel A".)
2. Remove the four screws, and remove the core stopper (B). (S side only) (Refer to ''Removing/
Installing the FTP Panel A".)
3. Remove the protector assembly. (S side only) (Refer to ''Removing/Installing the FTP Panel A".)
4. Remove the two PT rollers. (S side only)
5. Remove the drive cover (2).
6. Remove the four fixing screws, and remove the FTP panel B.
FTP panel B
Drive cover(2)
B4 x 8
B3 x 6
B4 x 8
B4 x 8
Installation
7. Perform the reverse of steps 1 to 6 of the removal procedure.
2-28
B4 x 8
FVS-1000 MMP1
Advertisement
Table of Contents
