Replacing The Pt Assembly - Sony FVS-1000 Maintenance Manual

4-3. Replacing the PT Assembly

4-3. Replacing the PT Assembly
Preliminary preparation
Remove the PT roller. (Refer to section 3-2-4.)
Tools
. Torque wrench (For 60 kgf.cm)
. Torque driver bit (For M5)
Removal
1. Removing the FTP panel
. S side: FTP panel B
. T side: FTP panel C
(Refer to section 2-7-4.)
2. Removing the side panel
. S side: Left side panel
. T side: Right side panel
(Refer to section 2-7-4.)
3. Disconnecting the connectors
Disconnect the following connectors.
S side:
. CN4/CN-1747 board
(Rear of S tension regulator assembly)
. CN1 to CN8/CN-1745 board
(Rear of PT assembly)
. CN1/SE-446 board (Front of PT assembly)
4-4
S side
Rear of S tention regulator assenbly
CN4 CN-1747 board
Front of PT assenbly
SE-446 board
CN1
Rear of PT assenbly
CN-1745 board
CN1
CN7
CN6
CN5
CN4
CN3
CN8
CN2
FVS-1000 MMP1