8.2 Set Motor Control Box Address
1:
On the Motor Control Box, use a flat blade screwdriver to remove the secured access panel,
revealing three address dials [
WARNING:
2:
Confirm address dials are set to address 0 0 1 [
3:
Replace the secured access panel.
31
Figure 31
Figure 31: Motor Control Box secured access panel
RISK OF DEATH OR SEVERE INJURY. DO NOT interfere or use the hoist limit
switches or limit switch override buttons located near the three address
switches. These switches are for use by ETC trained/authorized personnel
only!
0
0
Figure 32: Motor Control Box address dials and limits
].
Figure 32
].
Vortek NXT Hoist User Operations Manual