General Information For Storage - ETC Vortek NXT User's Operation Manual

Note:
Follow the layout plan in order to place the crates in the right position.
The layout, nameplate, and label on the side of the crate identify the model number and placement
within the installation.
Once out of the crate, Vortek NXT hoists are virtually indistinguishable from each other except for the
label on bottom of the Motor Control Box (MCB)
Note:

6.2 General Information for Storage

Vortek hoists are designed for indoor use only and must be stored in a cool, dry location in temperature
range between -20°C and 60°C at 10-90% non-condensing humidity. If the hoist has been exposed to
drastic temperature fluctuations (i.e. during transport), do not connect it to a power source
immediately.
The change of temperatures can cause condensation to form on both exterior casings and interior
parts which can damage the hoist if powered on.
Leave the Vortek hoist disconnected from a power source until it has equalized with the temperature
in the location it is to be installed.
11
Each Vortek NXT project has a detailed set of job drawings which determine the
installation location of each hoist and the related equipment. Refer to these drawings
for system layout, lift line layout, and location.
Figure 7: Motor Control Box label
If a hoist is installed in the wrong position, it will have to be uninstalled and moved
to the correct position.
.
[Figure 7]
Vortek NXT Hoist User Operations Manual