Mounting Vortek Hoist; Using Hoist Lifting Clips - ETC Vortek NXT User's Operation Manual

7.5 Mounting Vortek Hoist

7.5.1 Using Hoist Lifting Clips

Hoist lifting clips are provided only when ordered with the project. Contact ETC Professional Services
for ordering information.
WARNING:
Hoist lifting clips install into the hoist backbone and connect the hoist to the lifting cables.
shows a clip in the backbone channel prior to being rotated into the proper lifting position, and the clip
when it has been locked into the channel. Tighten the bolts on the lifting clips to 13.5 Nm (10 ft/lb) to
secure the clips in place on the backbone.
WARNING:
17
Risk of personal injury and/or damage to the hoist. Do not lift the Vortek NXT
hoist using methods other than the ETC's hoist lifting clips.
1
Figure 14: Install hoist lifting clips
Verify that the bolts are set and the clip cannot slip out of the backbone
channel. Prior to lifting, torque the bolts to 13.5 Nm (10 ft/lb) to secure the
clips.
2
3
13.5 Nm
Vortek NXT Hoist User Operations Manual
Figure 14