Hoist Capacity - ETC Vortek NXT User's Operation Manual

WARNING:
WARNING:
WARNING:

2.3 Hoist Capacity

All hoists have a limited Hoist Capacity and all line sets have a Working Load Limit. The Hoist Capacity
is identified on the product label on the motor control box. The limits are not the same for all line sets,
so be sure to check the Working Load Limit for all line sets in your system.
NEVER exceed the working load limit or the Hoist Capacity for any line set.
5
Do not enable the hold-to-run control button (up [
any other way than described in this manual. The hold-to-run control button
must always be under manual operator control.
Do not use a Vortek hoist if it does not appear to be in 100% perfect working
order.
Do not distract the operator's attention while they are operating the system.
] or down [ ] button) in
 
Vortek NXT Hoist User Operations Manual