Cancelling A Job While Scanning The Document - Brother MFC-9880 Owner's Manual

Setting Up Groups for Broadcasting
Groups allow you to send the same fax message to many fax numbers by pressing only one One
Touch key. (This is called Broadcasting.) First, you will need to store each fax number as a One
Touch or Speed Dial number. (See Storing One Touch Dial Numbers, page 18, also see Storing
Speed Dial Numbers, page 18) Then, you can combine them into a Group. Each Group uses up a
One Touch or Speed Dial key. Finally, you can have up to 6 small Groups, or you can assign up to
131 numbers to one large Group.
1
Press Menu, 2, 3, 3.
2
Select a One Touch or Speed Dial key where you wish
to store the number. (For example, press One Touch
key 02 to use as a Group.).
3
Use the dial pad to enter the Group Number (for
example, press 1 for Group 1).
4
To include One Touch or Speed Dial numbers in the
Group, enter them as if you were dialling. For example,
for One Touch Dial key 05, press One Touch Dial key
05. For Speed Dial location 09, press
Search/Speed Dial, then press 0, 9 on the dial pad.
The LCD shows
5
Press Set. The screen prompts you to enter a name.
6
Use the dial pad to enter a name for the group (up to 15 characters) (for example, NEW
CLIENTS) and press Set. (See Entering Text, page 165)
7
Press Stop/Exit.
I You can print a list of all One Touch and Speed Dial numbers. Group numbers
will be marked in the column of "GROUP". (See Printing Reports, page 31)
I Select a One Touch or Speed Dial key that has not already been used to store
a number. Otherwise Step 2 does not work.

Cancelling a Job While Scanning the Document

You can cancel a job while you are scanning it into memory by pressing Stop/Exit. Eject the
document by pressing Stop/Exit again.
05, #09.
PRESS SPEED-DIAL
OR ONE-TOUCH KEY
SETUP GROUP:GO
ENTER & SET KEY
G01:*05#09_
ENTER & SET KEY
Advanced Sending
37